+
  • 格式工厂九和画册-92.jpg
  • 格式工厂028 PVC给水管.jpg
  • 格式工厂026 PVC给水管.jpg
  • 格式工厂013.jpg
  • 格式工厂九和画册-95.jpg
  • 格式工厂productimage-478x478-290-d001.jpg
  • 格式工厂timg (4).jpg

PVC irrigation pipe

Irrigation pipes, also known as watering pipes, are made of PVC (polyvinyl chloride). The primary raw material is PVC resin powder, to which an appropriate amount of additives is added. The pipe is then processed and formed through a series of steps including mixing, extrusion, sizing, cutting, and flaring. This product complies with the following standard: GB/T13664-2006.


Keywords

九和橡塑

pvc管材

橡塑管材

聚氯乙烯管

pvc灌溉管



Product Details

Irrigation pipes, also known as watering pipes, are made of PVC (polyvinyl chloride). The primary raw material is PVC resin powder, to which an appropriate amount of additives is added. The pipe is then processed through a series of steps including mixing, extrusion, sizing, cutting, and flaring. This product complies with the following standard: GB/T13664-2006. Specifications: Diameters: 75mm, 90mm, 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 250mm, 280mm, 315mm.
Pressure: 0.2 MPa, 0.25 MPa, 0.32 MPa, 0.4 MPa

Product features:
1. Low flow resistance, with a roughness coefficient of 0.008–0.009; water-carrying capacity is 20% higher than that of cast iron pipes and 40% higher than that of concrete pipes.
2. High tensile strength—tensile strength at 23°C is no less than 45 MPa.
3. Excellent compression resistance—will not crack even when compressed to half of its outer diameter; boasts superior mechanical performance.
4. Lightweight and easy to transport: PVC-U pipes weigh only one-fifth as much as steel or cast iron pipes and half as much as concrete pipes. The weight of these pipes is approximately one-fourth that of ductile iron pipes of the same specification and length, and one-tenth that of concrete pipes. Consequently, transportation costs are reduced by 1/2 to 1/3.
5. The piping material is hygienic, non-toxic, and does not cause secondary pollution during flow; under stable temperature and pressure conditions, the irrigation pipes have a service life of no less than 50 years.
PVC irrigation pipes can closely follow the growth stages of crops, enabling modernized irrigation practices. The amount of water used for irrigation can be precisely tailored to the specific moisture conditions of both the crops and the soil. What’s most remarkable about these irrigation pipes is their ability to deliver water and fertilizer directly to the roots of crops in an accurate manner, taking into account current weather conditions. This approach significantly reduces the labor involved in manual operations. Moreover, the irrigation pipes can adjust the water delivery volume according to the specific growth needs of the crops, ensuring that irrigation is carried out at the right time and in the right amounts. As a result, this method lays a solid foundation for boosting crop yields.

Application areas
Irrigation pipes are widely used in various large- and small-scale projects, including indoor and outdoor water supply systems in urban and rural areas, rural water improvement initiatives, agricultural irrigation, brine pipelines in the salt industry, water delivery for aquaculture, mine ventilation, water supply and drainage, and sprinkler irrigation for landscaping and greening.

undefined
undefined
undefined
undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined

PVC irrigation pipe

Irrigation pipes, also known as watering pipes, are made of PVC (polyvinyl chloride). The primary raw material is PVC resin powder, to which an appropriate amount of additives is added. The pipe is then processed and formed through a series of steps including mixing, extrusion, sizing, cutting, and flaring. This product complies with the following standard: GB/T13664-2006.

Keywords:

Product Inquiries:

  • Product Description
  • Irrigation pipes, also known as watering pipes, are made of PVC (polyvinyl chloride). The primary raw material is PVC resin powder, to which an appropriate amount of additives is added. The pipe is then processed through a series of steps including mixing, extrusion, sizing, cutting, and flaring. This product complies with the following standard: GB/T13664-2006. Specifications: Diameters: 75mm, 90mm, 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 250mm, 280mm, 315mm.
    Pressure: 0.2 MPa, 0.25 MPa, 0.32 MPa, 0.4 MPa

    Product features:
    1. Low flow resistance, with a roughness coefficient of 0.008–0.009; water-carrying capacity is 20% higher than that of cast iron pipes and 40% higher than that of concrete pipes.
    2. High tensile strength—tensile strength at 23°C is no less than 45 MPa.
    3. Excellent compression resistance—will not crack even when compressed to half of its outer diameter; boasts superior mechanical performance.
    4. Lightweight and easy to transport: PVC-U pipes weigh only one-fifth as much as steel or cast iron pipes and half as much as concrete pipes. The weight of these pipes is approximately one-fourth that of ductile iron pipes of the same specification and length, and one-tenth that of concrete pipes. Consequently, transportation costs are reduced by 1/2 to 1/3.
    5. The piping material is hygienic, non-toxic, and does not cause secondary pollution during flow; under stable temperature and pressure conditions, the irrigation pipes have a service life of no less than 50 years.
    PVC irrigation pipes can closely follow the growth stages of crops, enabling modernized irrigation practices. The amount of water used for irrigation can be precisely tailored to the specific moisture conditions of both the crops and the soil. What’s most remarkable about these irrigation pipes is their ability to deliver water and fertilizer directly to the roots of crops in an accurate manner, taking into account current weather conditions. This approach significantly reduces the labor involved in manual operations. Moreover, the irrigation pipes can adjust the water delivery volume according to the specific growth needs of the crops, ensuring that irrigation is carried out at the right time and in the right amounts. As a result, this method lays a solid foundation for boosting crop yields.

    Application areas
    Irrigation pipes are widely used in various large- and small-scale projects, including indoor and outdoor water supply systems in urban and rural areas, rural water improvement initiatives, agricultural irrigation, brine pipelines in the salt industry, water delivery for aquaculture, mine ventilation, water supply and drainage, and sprinkler irrigation for landscaping and greening.

Get a quote

Attention: Please leave your email address, and our specialists will contact you as soon as possible!

Get a quote

Attention: Please leave your email address, and our specialists will contact you as soon as possible!

Related products


Image name

PE ground-source heat pump pipe

PE ground-source heat pump-specific pipe materials: These are a new type of product made from high-quality polyethylene resin as the primary raw material, with the addition of necessary antioxidants and UV absorbers, and produced through extrusion processing. They operate at working pressures ranging from 1.0 MPa to 1.6 MPa and are suitable for use in ground-source heat pump systems. Principle of Operation: PE ground-source heat pump-specific pipe materials exhibit significantly higher tensile strength and greater pressure-bearing capacity compared to conventional PE water pipes. They have low thermal expansion under stress, excellent resistance to environmental stress cracking, good creep resistance, and outstanding toughness and flexibility. These pipes demonstrate strong adaptability to uneven foundations and displacement, and can withstand harsh environmental conditions such as earthquakes and typhoons. Special additives incorporated into the raw materials give these pipes superior weather resistance (including resistance to ultraviolet radiation) and long-term thermal stability compared to standard PE water pipes. They also feature strong corrosion resistance, eliminating the need for additional anti-corrosion treatments when used to convey corrosive media containing antifreeze agents, and boast an exceptionally long service life. With smooth inner walls, they offer low flow resistance and high hydraulic conductivity, thereby reducing construction costs. They also display excellent wear resistance and are highly resistant to abrasion. The thermal conductivity coefficient of PE ground-source heat pump-specific pipe materials is 0.41 W/m·K, ensuring that winter construction is not adversely affected. Electrofusion (or hot-melt) connections are convenient and reliable, making installation and maintenance simple and straightforward (without requiring water shut-off during the process). When used in conjunction with ground-source heat pumps, this system harnesses shallow geothermal resources found near the Earth's surface—typically within depths of less than 400 meters—as a source of cold and heat for energy conversion in heating and air-conditioning systems. These shallow geothermal resources can be referred to as "geothermal energy," which refers to the low-temperature thermal energy stored in soil, groundwater, rivers, or lakes, derived from absorbed solar and geothermal energy. This form of energy is considered a clean and renewable energy source.

+

See more

< 1...161718...21 >